Tag: seaglass

Posted on

DIY Seaglass Christmas Wreath

This tutorial was requested by a friend, and I am happy to share what I’ve learned about making these beautiful, eye-catching Christmas wreaths.

To start, you must have a decent stash of green seaglass. You will utilize some larger pieces (think: the size/width of a toonie), as well as many small pieces. Various shades of green really give these wreaths dimension.

In 2021 I made these wreaths for the first time, and the response was incredible. I shared as my own creation, but quickly I had people requesting them for gifts for their parents, friends and coworkers.

This year I’ve moved forward with a plan to make (and sell) about 20 of these wreaths for the Christmas season. I’ve been gathering green glass all year for this!

The materials you will need for this project are as follows:

  • Cardstock
  • Shadowbox frame
  • Green seaglass
  • E6000 glue
  • Ribbon
  • Circular object for tracing
  • Pencil

As always, we start with clean glass. I use a bleach solution to clean seaglass. I soak the glass for at least a few hours, rinse well and lay on a towel to dry. Then I store it in containers for use.

Your cardstock will need to be cut to fit your shadowbox. I recommend you always do this step before gluing anything onto the cardstock, as it can be very difficult to cut once your project is done. I use a Fiskars paper cutter to cut my cardstock, as it makes for a very straight edge.

I take a large circular object and trace gently with a pencil. Dark marks can be difficult to fully cover up with glass, so I do recommend a light outline, and I do not recommend pen or markers for the outline. (You’ll only make that mistake once!)

Do your best to center the circle (horizonally and vertically) on your page. Sidenote: you might notice the photos here are from different wreaths. I’ve made so many this season, I just snapped photos at random 🙂

To start the base for your wreath, you can use larger pieces for the main outline. I like to place glass above and below the markings, as I enjoy the look of a slight fuller wreath.

I tend to choose glass with “points” and face the points outward or inward, to give the appearance of branches. The adhesive isn’t fast-drying, so you can move pieces around slightly if needed.

Once you’ve completed the outline, you will want to layer some pieces of glass over the top of the other glass, to add dimension. This is where various shades of green will really come in handy!

Once you are done layering glass, you should leave the cardstock in place for up to 24 hours before attempting to frame it. As I said, E6000 does not dry down immediately, so you want to ensure all pieces are given proper time to dry so they don’t shift.

Next you will make a bow for your wreath. I use double-sided ribbon, and I definitely love the traditional Christmas prints (ie. plaids).

Cut a piece of ribbon to about 12″, and tie it into a tidy bow. The ends of the ribbon should be cut on a 45 degree angle.

Place some E6000 on the backside of the ribbon (knot), and lay in place. I normally put the bow on the bottom of the wreath, but I’ve done the top as well and it looked sweet.

Once your art has fully dried, it’s ready to be framed! I recommend removing the glass pane and cleaning, front and back, prior to using it. Your art will look so much better with clean glass.

Pop in your cardstock, and you have a festive delight to gift, or to keep for your own home.

Thanks for stopping by today to check out my post.

Heather

Posted on

DIY Seaglass Art

Well, this is a post I’ve been wanting to make for quite some time. In July I was playing around on a random beach with my son, finding shells and enjoying the salty air, when I came across a very small piece of green seaglass sitting among the sand. I had never found seaglass before, but I immediately wanted more! We visited the same beach the next day and didn’t find a single piece. I asked around about seaglass beaches in the area, and I was advised to “look for rolling waves”.

Within a few days, a friend and I were out scouring beaches in Bay Bulls, finding little nuggets of glass among the beautiful shorelines.

We did this a few days a week, mostly finding small pieces in green, white, brown and sometimes indigo.

Since that time, our weather has been cooperative and I am still seaglass hunting well into February! We have expanded our search zone a bit, and the payoff has been huge! I attribute that to the winter months not being seen as the ideal seaglass hunting weather, and I think getting out of town to more sparsely populated areas helps as well.

My mom kept asking, “What are you doing with all the seaglass?”, and the best I could say was, “I will make wall art out of it some day.” I dreamed up projects but they never really came to life. Truth is, finding seaglass, cleaning it and just admiring it was almost enough for me. Almost.

There are different types of glass that can be found on the beach, ranging from perfect, cloudy, rounded pieces of traditional seaglass, to more jagged, clear pieces of beach glass. At one point I was collecting beach glass, before really realizing it wasn’t exactly what I had in mind. I purchased a very simple rock tumbler and got some gritty sand from the beach. Dampened the sand, threw in some beach glass, and tumbled it for a couple of days. The glass came out nice and cloudy.

Some people make cloudy glass from scratch by breaking up bottles (using goggles, gloves, etc) and tossing it into a tumbler for a few days. I prefer the traditional way of finding glass, but if you find glass that’s not quite cloudy enough, no harm in tumbling it for a day or two until it’s usable, IMHO.

So, the materials you’ll need are listed below:

  • Seaglass
  • E6000
  • Cardstock
  • Shadowbox frame
  • Pencil

To start, cut your cardstock to fit the shadowbox. If you have a 5X7 frame, cut your cardstock 5X7. I use a paper cutter to get nice, straight edges.

I laid placemats on the table prior to gluing, mostly just in case glue soaked through the cardstock. I would recommend this for sure.

Lay out your seaglass on the cardstock in the pattern you choose. If you’re doing flowers (like I did, to start), lay out your glass, figure out where you want the flower stems, and just slightly move the glass out of the way to draw the stem before you begin gluing.

Once your pieces are laid in place, lift one at a time and place a dab of glue on the underside. Gently lay in place. Most adhesives will take a little time to fully set, but try not to move it around once it’s laid.

Continue gluing pieces until finished. Lay entirely flat to dry.

Sometimes you’re lucky enough to find little pieces of ceramic plates on the beach, as I did here. I used them for flowerpots. You can also use rocks or seashells.

Shadowboxes really help these pieces look complete. They also protect from dust and dirt, as you can imagine these cardstock pieces will not be entirely easy to clean.

This one was made with seashells my toddler picked on the beach. I cleaned them thoroughly with bleach and dried them, loosening debris with a soft toothbrush prior to gluing. Ensure the glass and shells are entirely dry to ensure they adhere properly.

The best advice I have when you’re looking to make seaglass art is to work with the pieces and shapes that you have. And definitely come up with a little stockpile before attempting to create. It’s addictive so you might as well buy 10 shadowbox frames now and save yourself the trips to Michaels. Most of the frames I’ve used are 5X7 but I do have a bunch of 8X10s as well.

You can incorporate things like twigs, pearls, beads and rope into these pieces quite easily. They are fun to make, and you can let your imagination run totally wild. Finding treasures along the shorelines with your children and letting them transform their finds into art is a fantastic way to foster creativity.

Happy creating! And thanks for stopping by today!

Heather