DIY Beachcomber Wall Art

One of the most peaceful hobbies I have is beachcombing. For many years, whenever I’ve been near a beach, I would be found digging for natures treasures, taking shells and other finds home for “future projects”, many of which never really materialized.

In 2020 I began combing beaches for seaglass, which is one of my favorite things in the world to do. Sitting on the beach, often barefoot, with just the sound of the gentle waves rolling in…..heaven!

Recently my partner and I traveled to the Dominican Republic for a week at an all-inclusive resort. We enjoyed walking the coastline every morning, catching the early sun. Of course, we couldn’t resist gathering a few treasures to bring back with us.

Upon our return, I cleaned all of these empty shells and dried up coral with bleach solution, as I do with seaglass. I didn’t soak them long, as bleach can make delicate shells brittle.

This project is fantastic if you have a passion for beachcombing yourself, or if you are looking to utilize special treasures your kids find (or bring back from trips).

For this tutorial you will need the following:

  • A shadowbox frame (I used a 12X12″ frame here)
  • E6000 glue
  • Clean, dry treasures
  • Cardstock (I used a 12X12 piece to fit the frame)

I love lightly-patterned cardstock, however you can use plain.

Depending on the size of your shadowbox, you may need to cut your cardstock to fit. I use a Fiskars paper cutter to get a nice, even cut. Make sure to cut your cardstock *before* you start gluing items onto the page.

First you will plan out the placement of your items. I recommend that you work 1-2 inches in from the border of your page. Gently place your treasures on the sheet, but don’t glue them down just yet. You may want to adjust them as you go. Try to balance colors (ie. dark and light) and larger pieces to bring an aspect of symmetry to your art.

When you’re happy with the placement of the treasures, pick each one up individually and place a little E6000 adhesive on the underside, and replace it on the paper. E6000 doesn’t dry immediately, so you have time to make small adjustments. Also be mindful that if you accidentally nudge the treasures, they will likely move.

Once you’ve glued all of your treasures in place, I recommend *not moving the cardstock* until the treasures have had a chance to dry. Dry time is a few hours, but I typically leave them for about 24 hours before framing.

To frame, take the glass pane out of the shadowbox and give it a good clean with glass cleaner, front and back. Frames normally aren’t totally clean when you get them from the store, so don’t skip this step.

Pop your art in your shadowbox and, voila!

Every time I look at this piece, I will remember that relaxing and wonderful trip to the Dominican Republic. This makes a great gift for your travel partner as well!

Thanks for stopping by to check out my post today!

Heather

DIY Seashell Photo Frame

My husband makes fun of me (playfully, of course) for collecting seashells and rocks from pretty much anywhere we visit. I bring them home thinking, “I will do something crafty with them some day!” and sometimes I actually do….

Well recently we took our first family vacation to Florida and we were able to collect a bunch of beautiful shells from a day spent at the beach.

For Father’s Day I decided to put those shells to use.

Materials needed for this project:

  • Wooden frame
  • Glue gun
  • Glue sticks
  • Shells (cleaned)
  • Photo

I picked up a sweet little 4X6 frame from Michael’s. I cleaned the frame to make sure it was free of dust and debris, so the hot glue would stick properly.

Heated up my glue gun and got started right away. This project took 15 minutes in total.

I laid out shells on the frame to see where I felt each one should go. Then I kept adding shells until I was satisfied with the result. I found it helpful to lay out the larger shells first and then fill in empty spaces with small shells.

On our trip we kept taking note of how many shells had little round holes in them, so I knew I wanted to use a few of those for sure.

To glue, I simply filled the underside of each shell with hot glue, and placed on the frame. Work quickly, though, as hot glue does tend to dry/harden faster than regular glue.

The frame came with the writing on it, however (if you’re really adventurous) you could totally wood burn some text into it as well.

I stuck a cute picture (of him with the baby) from our trip into the frame, and it made a perfect Father’s Day gift.

This would be an excellent gift for a birthday or Christmas as well.

Thanks for checking out my post.

Heather